Modelo CESM para gestionar la degradación y vida remanente en sistemas de transmisión de energía

dc.contributor.advisorMelgar Sasieta, Héctor Andrés
dc.contributor.authorArias Velásquez, Ricardo Manuel
dc.date.accessioned2021-01-25T18:12:59Z
dc.date.available2021-01-25T18:12:59Z
dc.date.created2020
dc.date.issued2021-01-25
dc.description.abstractOn the last twenty years, maintenance analysis and execution has changed, perhaps more than any other discipline in engineering. These changes are mainly based on the increase and variety of physical assets (industrial plants, equipment, buildings, among others). The designs are more complex, new methods of maintenance are applied and the optics in the organization has changed with respect to the maintenance and its responsibilities to assure the reliability of the system. Several developments have been presented to establish a model of greater coverage that allows the evaluation of the equipment. All the companies and goverments need a better reliability in their grid, and an asset management strategy for the remaining life management. However, the calculation of the probability of failure of an equipment is developed in this thesis, for power lines, transformers and circuit breakers. It can be determined by its state which is derived from the estimation of the remaining life. The remaining life recommended by international standards, does not consider the variety of conditions that present the national territory by geography, climate, among others. All equipment does not age at the same speed and is not subject to the same operating or environmental conditions. The knowledge contribution is an assessment model, for a better estimate of the reliability of the power system, with focus in remaining life for the asset and system, the case study has been done successfully, with power transformers, circuit breakers and cables of power lines with high accuracy and effectiveness. The research focused on the main elements of the power transmission system: Power transformer, switch and power lines, it‘s upper than 138 kV (High and very high voltage transmission system), for the physical assets associated to transmission system. In this thesis, the technical assessment for the reliability and remaining life analysis of the electric power system has been achieved, the results are the following: 8 objectives with 24 indicators for the 3 most important equipment of the power system: Inductive equipment, switchgear, cable and conductors of overhead lines. The model CESM developed, it includes the assessment of effectiveness of 98.13% in operating condition for power transformers, 99.36% for switches and 98.43% for overhead lines conductors. The benefits value with a costs analysis has identified savings of USD 22,606,831.60, it was obtained by applying the model. The results of improvement of costs and service level in the implementation of the model in Peru are presented, improving the indicators in switchgears, transformers and conductors of electric power transmission lines.es_ES
dc.identifier.urihttp://hdl.handle.net/20.500.12404/17930
dc.language.isospaes_ES
dc.publisherPontificia Universidad Católica del Perúes_ES
dc.publisher.countryPE
dc.rightsinfo:eu-repo/semantics/closedAccesses_ES
dc.subjectLíneas eléctricas--Mantenimientoes_ES
dc.subjectSistemas de energía eléctrica--Evaluaciónes_ES
dc.subjectTransmisión de energía eléctricaes_ES
dc.subject.ocdehttps://purl.org/pe-repo/ocde/ford#2.07.03es_ES
dc.titleModelo CESM para gestionar la degradación y vida remanente en sistemas de transmisión de energíaes_ES
dc.typeinfo:eu-repo/semantics/doctoralThesises_ES
renati.advisor.dni10145776
renati.advisor.orcidhttps://orcid.org/0000-0003-1110-123Xes_ES
renati.author.dni42358427
renati.discipline732028es_ES
renati.jurorPaz Espinoza, Freddy Albertoes_ES
renati.jurorMelgar Sasieta, Hector Andreses_ES
renati.jurorNoel Julien, Georges Andrées_ES
renati.jurorVillicaña Ortiz, Eunicees_ES
renati.jurorLafitte Vega, Jorge Leonidases_ES
renati.levelhttps://purl.org/pe-repo/renati/level#doctores_ES
renati.typehttps://purl.org/pe-repo/renati/type#tesises_ES
thesis.degree.disciplineIngenieríaes_ES
thesis.degree.grantorPontificia Universidad Católica del Perú. Escuela de Posgradoes_ES
thesis.degree.levelDoctoradoes_ES
thesis.degree.nameDoctor en Ingenieríaes_ES

Files

Original bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
ARIAS_VELASQUEZ_RICARDO_ MODELO_CESM_GESTIONAR.pdf
Size:
7.05 MB
Format:
Adobe Portable Document Format
Description:
Texto completo

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: