Now showing items 52-66 of 66

    • High performance implementation of MPC schemes for fast systems 

      Correa Córdova, Max Leo (Pontificia Universidad Católica del PerúPE, 2016-06-22)
      In recent years, the number of applications of model predictive control (MPC) is rapidly increasing due to the better control performance that it provides in comparison to traditional control methods. However, the main ...
    • Irregularly sampled data in the design of a soft sensor system: some preliminary results 

      Griesing-Scheiwe, Fritjof (Pontificia Universidad Católica del PerúPE, 2019-01-21)
      In modern industrial applications, sensors are an expensive part of installed systems. Nevertheless, many system variables cannot be measured sufficiently frequently or accurately. Thus, soft sensors have been developed ...
    • Mixed H2/H∞ control for infinite dimensional systems 

      Noack, Matti (Pontificia Universidad Católica del PerúPE, 2017-08-28)
      The class of infinite dimensional systems often occurs when dealing with distributed parameter models consisting of partial differential equations. Although forming a comprehensive description, they mainly become manageable ...
    • Modelado y control basado en redes neuronales artificiales de una planta piloto de desalinización de agua de mar de ósmosis inversa 

      Carrasco Banda, Neil Neizer (Pontificia Universidad Católica del PerúPE, 2016-04-20)
      En este trabajo de tesis se parte de la hipótesis de que: es posible aumentar la eficiencia de las plantas desalinizadoras de agua de mar utilizando sistemas de control inteligente, conformados por controladores multivariables ...
    • Modelling and essential control of an oceanographic monitoring remotely operated underwater vehicle 

      Rojas Mendoza, Jorge Enrique (Pontificia Universidad Católica del PerúPE, 2017-10-14)
      Ocean pollution and contamination of the water are serious problems because of its rapid increase and spread, having a negative effect on people, animals and the environment. Due to this, new technologies to monitor and ...
    • Observability studies of a turbocharger systems 

      Tejada Zúñiga, María Cristina (Pontificia Universidad Católica del PerúPE, 2016-06-02)
      The use of diesel engine turbochargers is increasing today, as it represents an option that o ers high e ciency and low fuel consumption. To design the control system in order to reduce the level of exhaust emissions ...
    • Observation and control of a ball on a tilting 

      Contreras Martinez, Dimel Arturo (Pontificia Universidad Católica del PerúPE, 2017-11-03)
      The ball and plate system is a nonlinear MIMO system that has interesting characteristics which are also present in aerospace and industrial systems, such as: instability, subactuation, nonlinearities such as friction, ...
    • Optimal control for polynomial systems using the sum of squares approach 

      Vilcarima Sabroso, Carlos Alberto (Pontificia Universidad Católica del PerúPE, 2018-10-16)
      The optimal control in linear systems is a widely known problem that leads to the solution of one or two equations of Ricatti. However, in non-linear systems is required to obtain the solution of the Hamilton-Jacobi-Bellman ...
    • Planeamiento de trayectoria y control de un robot móvil marítimo aplicando optimización por colonia de hormigas 

      Uriol Cabrera, Ronald Humberto (Pontificia Universidad Católica del PerúPE, 2016-06-02)
      El presente trabajo desarrolla un algoritmo de planeamiento de trayectoria basado en Optimización por Colonia de Hormigas, en conjunto con un controlador óptimo, para el desplazamiento de un barco robot. Se presenta ...
    • Practical implementation of fault detection scheme in a three tank system 

      Córdova Ricapa, Fernando (Pontificia Universidad Católica del PerúPE, 2016-06-22)
      This thesis presents a practical implementation of fault detection scheme in a real system by using residuals signals. These residuals have been generated applying the method of a model-based fault diagnosis. Different ...
    • Robust estimation of vertical wheel forces via modulation-based sensor fusion 

      Segura Rojas, Juan de Dios (Pontificia Universidad Católica del PerúPE, 2019-11-05)
      Since its introduction by Shinbrot, numerous variations of parameter identification based on the Modulating Function Technique (MFT) have been developed. Recently researches have achieved to estimate also states through ...
    • Simulación y control de una turbina eólica para generación de energía eléctrica 

      Cárdenas Rios, Jesica Patricia (Pontificia Universidad Católica del PerúPE, 2016-03-09)
      Los sistemas de generación de energía eléctrica eólicos se presentan como una alternativa para solucionar en parte los problemas de contaminación ambiental, esta tesis se desarrolla con la intención de diseñar un control ...
    • Sistema de visión artificial para el reconocimiento y manipulación de objetos utilizando un brazo robot 

      Sobrado Malpartida, Eddie Ángel (Pontificia Universidad Católica del PerúPE, 2011-05-09)
      En este proyecto, un brazo robot permitirá seleccionar objetos (tornillos, tuercas, llaveros, etc) que se encuentran en una mesa, independiente de la posición y orientación. El problema se aborda mediante un esquema de ...
    • Studies on nonlinear robust tracking control for a quadcopter system 

      Acceso restringido
      Saenz Acuña, Johnny Henry (Pontificia Universidad Católica del PerúPE, 2017-11-04)
      This thesis presents the modeling and control of a quadcopter vehicle and the application of adaptive backstepping for attitude stabilization. This nonlinear technique has been chosen because they can explicitly address ...
    • Studies on obstacle detection and path planning for a quadrotor system 

      Valencia Mamani, Dalthon Abel (Pontificia Universidad Católica del PerúPE, 2017-11-06)
      Autonomous systems are one interesting topic recently investigated; for land and aerial vehicles; however, the main limitation of aerial vehicles is the weight to carry on-board, since the power consumed depends on this ...